Korleis å hindre at kjøttkverna rustar?

The meat grinder is a machine for meat processing enterprises to process raw meat in different sizes according to different processing requirements. It is widely used in making sausages, ham, luncheon meat, meatballs, pet food, and other meat products. Made of stainless steel, it has no pollution to processed materials and meets food hygiene standards. The tool is specially heat treated, with excellent wear resistance and long service life.

The meat grinder is easy to operate, easy to disassemble and assemble, easy to clean, and has a wide range of processed products. After processing the material, it can maintain its original nutrients well and has a good preservation effect. The tools can be adjusted or replaced at will. After assembling or changing the reamer, the tightening nut must be tightened to ensure that the grid does not move. Otherwise, due to the relative movements between the grids and the rotation of the reamers, it will also affect the material to refinement. The reamer must be closely attached to the grid, otherwise, it will affect the cutting efficiency. The screw feeder rotates in the machine wall to prevent the spiral surface from colliding with the machine wall. If it touches slightly, it will damage the machine immediately. However, their clearance can not be too large, too much influence the feeding efficiency and extrusion force, and even make the material flow back from the gap, so the processing and installation requirements of this part are higher.

Generelt er metalljernprodukter rustne, og rusten kan fjernes med fysiske midler. Men hvis overflaten på jernproduktet ikke er flat, er det vanskeligere å bruke fysiske metoder. Inne i kjøttkvernen er det en spiral, vi kan bruke denne metoden for å fjerne rusten. Rør godt med fint sand og gul leire, plasser i en kjøttkvern for blanding, og la det fine sandet og den gule leiren fjerne rusten fra kjøttkvernen. Men vær sikker på å unngå å installere bladet, ellers vil bladet bli ødelagt.